Facilities List

Milling Centers:

 

·       BRIDGEPORT, GX 1000 (40" x 21" x 21"){NEW} Vertical Machining Center (X,Y,Z), configured with three guideways and five guide trucks on both the X- and Y-axis; two guideways and six guide trucks on the Z-axis.

·       OKUMA, MC-V 3016, 30” x 16” with Indexer, High Pressure Coolant & Chip Conveyor.

 

·       BRIDGEPORT, GX 1600, 27 ½” x 63” Travel, High pressure coolant, with indexer.

·       OKUMA, Millac 44 Horizontal Milling Center, 15” x 18” x 16” Travel, with pallet changer.

·       BRIDGEPORT, Milling Machines (2), Power Travel.

Turning Centers:

 

·       OKUMA, L370 MW Twin Spindle with live tooling and bar feed, 2 3/4” thru Spindle.

·       OKUMA, ES-L8 with bar feed, 1 5/8” thru Spindle, 8” Swing.

·       OKUMA, LB-12 with bar feed, 1 5/8” thru Spindle, 8” Swing.

·       METHODS, Slant 50C, 2 ½” thru Spindle, 10” Swing.

·       HARRISON, Alpha-460T, 16” Swing, 6 Ft. Bed.

·       HARDINGE, Second Operation Lathe with Turret

·       CLAUSING, 14” Lathe

Part Marking:

 

·       TRUMPF Trumark Station 5000-Laser Part Marking

Drill/Tapping /Cutting:

 

·       BURGMASTER, Multi-Spindle Drill Press

·       DELTA, Drill Press(3)

·       DELTA, Press with High Speed Tapping

·       KALAMAZOO, Cut-Off Saw

·       Calibrated Master Gage Block Set

·       DELTA, Band Saw

·       ECONOLINE, Bead Blaster

·       SWEECO, Vibration Burring System

Quality Control:

 

·       One Full Time Quality Control Inspector

·       DELTONIC, DH 14 Optical Comparator

·       FOWLER SYLAS, Electronic Height gage

·       BROWN & SHARP, Profilometer –Roughness Gage

·       STARRETT, Granite Surface Plate-Grade-A-Inspection,  18” x 24”

·       FOWLER, Dial Bore Gage- 1.4” to 6”

·       Chamfer Gage Set

·       SWIFT, Inspection Microscope

·       All Standard Micrometers(0” – 10” Calibrated)

·       All Standard Thread Rings and Thread Plugs –Certified

·       VERMONT, Gage Pins- .011’ thru 1.00”

Vendor Support:

·       WELDING: [Steel, Alum., Stainless/TIG & MIG]        {CERTS: AWS D17.1; EMC-GTAW-01;  P8-GTAW-3469; RCW-GMAW-01}

·       HEAT TREATING

 

·       METAL FABRICATION: [water jet/ laser cut, punch, form, surface conditioning, welding, etc]

·       CASTINGS, EXTRUSIONS, MOLDS

·        FINISHING: Plate, Paint, & Powder Coat